- Mainly based on https://github.com/jamescarruthers/PlotteRXY.
- I am using a different main board, y-axis, z-axis. Parts found in onshape.
- Open fluidnc in the browser. See https://github.com/HalFrgrd/PlotterXY/blob/main/Firmware/readme.md
- Home all the axes.
- Generate some gcode using vpype. See https://github.com/HalFrgrd/PlotterXY/blob/main/Software/readme.md
- Upload or copy it over to the sd card.
- Plot!