F3 lab does not properly handle mission backgrounds with custom lighting profiles.

[MoerasGrizzly]

Heya

When selecting a lighting profile in the F3 lab, the only change that is made to the rendering box is the tonemapper. All other values remain the same.

[MoerasGrizzly]

I had another look at this, and not only doesn't it load the values properly, when a mission is equipped with a lighting profile, the F3 lab fails to load entire backgrounds properly.

[MoerasGrizzly]

I'd really appreciate it if this would be fixed rather then being ignored for another couple of years.
The F3 lab not even loading suns properly if an alternate lighting profile is in use makes it very hard to actually make tweaks!

[MoerasGrizzly]

To properly explain this problem a bit: One of these pictures is loading mission BP-04. The other one is BP-00
BP-04 uses the default lighting profile
BP-00 uses the profile "default without ambient". When that mission is loaded, all the suns dissappear.

[MjnMixael]

I'd really appreciate it if this would be fixed rather then being ignored for another couple of years. The F3 lab not even loading suns properly if an alternate lighting profile is in use makes it very hard to actually make tweaks!

RIP

[MoerasGrizzly]

I'd really appreciate it if this would be fixed rather then being ignored for another couple of years. The F3 lab not even loading suns properly if an alternate lighting profile is in use makes it very hard to actually make tweaks!

RIP

sobs