[HV Power Monitor] can't run in Linux with 32 Firmware

[polo000]

When I setup for voltage and it failed as following error msg.
but it's workable with previous firmware version.

Polo:/power/monsoon_hvp$ chmod +x monsoon_hvp.par
Polo:/power/monsoon_hvp$ ./monsoon_hvp.par --startcurrent 8
Set start current to 8.0
Polo:/power/monsoon_hvp$ ./monsoon_hvp.par --current 8
Set runtime current to 8.0
Polo:/power/monsoon_hvp$ ./monsoon_hvp.par --voltage 4.2
Traceback (most recent call last):
File "<embedded module '_launcher'>", line 168, in run_filename_from_loader_as_main
File "<embedded module '_launcher'>", line 33, in _run_code_in_main
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/java/com/google/android/testing/powertools/monsoon_controller/monsoon.py", line 264, in
main(FLAGS(sys.argv))
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/java/com/google/android/testing/powertools/monsoon_controller/monsoon.py", line 95, in main
SetVoltage(mon, FLAGS.voltage, FLAGS.ramp)
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/java/com/google/android/testing/powertools/monsoon_controller/monsoon.py", line 134, in SetVoltage
mon.setVout(voltage)
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/third_party/py/Monsoon/HVPM.py", line 53, in setVout
self.checkDacValues()
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/third_party/py/Monsoon/HVPM.py", line 159, in checkDacValues
self.__checkDacCalLow(dacCalLow)
File "/usr/local/google/home/Polo/power/monsoon_hvp/monsoon_hvp.par/google3/third_party/py/Monsoon/HVPM.py", line 164, in __checkDacCalLow
raise ValueError("dacCalLow out of tolerance. Recommend running HVPM.calibrateVoltage()")
ValueError: dacCalLow out of tolerance. Recommend running HVPM.calibrateVoltage()

[msoonjared]

There was a bug in the code a while back which had an incorrect dacCalLow check value which was fixed, double check what that value is in your HVPM.py file. The correct value(s) for dacCalLow should be:
value <= 0xD000 or value >= 0xF000, originally the lower bound was 0xE000 which resulted in the error you are seeing being thrown.

If that doesn't fix it shoot an email to pmsupport@msoon.com and we'll take a look at what else might be causing the issue.