Distance to home not updating

[cwatson71]

Hello, I am having an issue with distance to home not updating even with a GPS lock. I confirmed that I had 20 links established when testing the drone. The GPS module is the HGLRC M100. Not sure if there is something config-wise I need to check or if it may just be a bad GPS module. The GPS coordinates are changing as the drone moves around, but the DTH never changes.
One piece I am not sure about that may be affecting it, is I am testing it inside the min distance value I have set for RTH. RTH has not been working properly so I am not letting it get too far away from me at the moment.

[sensei-hacker]

What does the distance to home say?
What version of INAV are you running?

You aren't doing an emergency force arm to arm despite a safety problem, are you?

[cwatson71]

Hello, sorry I left out the version info. I am using iNav 8.0.1. DTH is reading 0. No on the force arm. The drone show all green on the status page. I am not arming it though. I am manually moving it around my property for this test. I moved it at least 30m in each direction during the test.

[sensei-hacker]

The home point is defined by where the aircraft was armed.

[cwatson71]

Gotcha, thanks for the help.