SNES HW2 - Controller detection does not work #1335
Description
Answers checklist.
- I have read and will follow the terms above.
- I have read the documentation BlueRetro wiki and the issue is not addressed there.
- I have updated my BlueRetro to latest version available.
- I have searched the issue tracker for a similar issue and not found a similar issue.
BlueRetro firmware version
25.04
BlueRetro firmware specification
HW2
BlueRetro firmware variant
System specific
BlueRetro hardware type
Internal install DIY
Manufacturer
DIY
System used
Nintendo SFC SNES
Bluetooth controller brand & name
Sony PS5 Dualsense and othes - this does not affect the issue.
What is the problem? (only list ONE problem per report)
Controller detection doesn't work on SNES HW2.
I build an HW2 instalation on Nintendo SNES.
Pins 35 and 36 are HIGH, I can connect my bluetooth controller and it works OK.
I've installed push buttons on both SNES controller ports connected to detection pin (IO35 and IO36) and GND, so when I insert a wired gamepad, the button is pressed and the IO is grounded.
It was expected bluetooth controller jumps to next port and the wired gamepad works normally. I did it in a Dreamcast system and works like a charm.
Thank you for your amazing job. I hope this issue be resolved soon.
What did you expect to happen?
I expected to have wired gamepad working when I connected it on a port as pin detection is grounded.